|
 Using the JOYEAR JSRA-WS0110 WorldSpace Radio Receiver
Basic Setup
-
Press the POWER button to turn the receiver on.
"WELCOME" will appear in the display briefly.
-
Adjust the antenna to the proper orientation so
that the maximum signal bars are displayed.
-
"NO DATA" will be shown. Press the LEARN button
for 3 seconds and PRESET button to initiate WorldSpace satellite radio
signal reception.
Basic Operation
-
Turn the power on and position the antenna to
the proper direction. The first WorldSpace broadcaster should be audible.
-
Press the BC up/down button repeatedly to select
the broadcaster.
-
If there is a service component in the selected
broadcaster, press the SC up/down button to select the SC within the BC.
-
LCD displays broadcaster name, ID and program
type.
Learn Mode
This section does not apply if after completing basic set-up and basic
operation you are receiving WorldSpace audio content. If no broadcasters can
be heard and the display window shows an adequate signal strength, please
follow these instructions :
-
Press the LEARN button for 3 seconds or more. "1
AUT SCAN" will appear in the display.
-
Press the PRESET button to start scanning
-
If the search is successful, the 1st broadcaster
will be heard and the rest of the broadcaster will be in memory.
Buy online now
|
 |
|
